Sturdy chassis for sim racing. The instructions for assembling the chassis were well written and easy to understand, but it was a bit difficult aligning everything to assemble it properly. I realize that the whole point of this system is that it's highly adjustable, but it would be helpful to have some positions marked on the extruded rails for the initial assembly as if the components are a fraction of an inch off, the screw holes don't align properly. Also, for me. the shifter is not positioned anywhere close to where it's located in my car, so I had to customize that installation, as well as the the installation of my Fanatec inverted pedals. Overall, I am pleased with the quality of the rig and once I get it tweaked to replicate my car as closely as possible, it will be a great tool to improve my performance driving. I would suggest that Ricmotech include a customizable chart to allow customers to measure point to point in their cars to aid in the recreation, I did this on my own but it took a few tries to get all the measurements I needed. Also, it would be helpful to have a bit more information about installing the components, I had to reach out to...
Read moreI ordered clutch and accelerator springs plus a brake pedal spacer block (for heel-toe shifting/braking) for my T3PA pedals. The cost was reasonable, shipping was reasonably quick, and both springs are great. The stock springs are WAY too soft, so they are a big improvement. I'm still working with the spacer block, which really only works with the conical brake mod and even then I haven't gotten it setup quite right yet. Personally I could use another 5mm or so. As a recommendation, it would be really great if a kit of several different thicknesses was offered, so I could get it exactly where I like it. Either way it's certainly much better than stock! I love that this company is offering products for the...
Read moreReceived the plans timely. Instructions where easy to follow. Tool list and suggestions where great. Completed the first one in a day. The next weekend I disassembledon't it and increased the side supports to accommodate my hieght i'm 6.4 even the large plans was a little cramped. This project is still in the works as I plan to widen the base and raise the seat. All in all I'm very happy with my purchase and have been racing Forza6 with great anticipation for 7. I intend on adding a longer wider base to accommodate a few frills, like a console with a cup holder and shifter mount, a surround sound system, and...
Read more